Hitachi GS4000 Series Installation Manual page 11

SAFETY GUIDE
This document provides safety-related notices for use of the GR4000 Gigabit Router and the
S4000 Gigabit Switch, hereafter called the "device."
•
Read the following material completely and carefully before using the device.
•
Keep this document at hand after you read it, so that you can always refer it later.
•
For any operation involving the device, follow the directions and procedures given by
this document.
•
Observe the cautions labeled on the device or those presented by this document. If you
fail to do so, you will cause damage to yourself or the device.
BEFORE USING GR4000/GS4000 SERIES ROUTERS AND SWITCHES
We have standard symbols displayed on the GR4000 or GS4000 and in the manuals to guide you
in using the GR4000 or GS4000 correctly and safely without injuring yourself and others, or
damaging equipment assets. Below are the symbols and their meanings.
Note:
*
Caution:
!
WARNING: IF YOU IGNORE INSTRUCTIONS PRECEDED BY A WARNING SYMBOL, YOU
•
Do not attempt to perform any operations not specifically described in the
documentation. In the event of a problem, turn off the power, unplug the power cable,
and contact a qualified service technician.
•
The instructions displayed on the GR4000 or GS4000 or in this documentation are the
results of our thorough consideration. Still, there is the possibility of a problem
occurring unexpectedly, so be alert and use common sense.
WARNINGS
•
Do not insert or place metal or inflammable objects inside the chassis of the GR4000 or
GS4000 through the ventilation slots. Doing this could cause a fire or an electric shock.
•
When pressing the protected switches in the BCU front panel, do not use objects that
can be easily broken, such as wooden toothpicks or plastic pins, or items that may be
difficult to remove if dropped into the areas where the switches are located. Doing this
could cause a fire or an electric shock.
•
Do not use the device if there is smoke or an unusual smell coming from it. If either
occurs, immediately turn power off and unplug the power cable from the outlet.
•
If AC power supplies are installed, pull out the power cables from the device.
•
If DC power supplies are installed, switch off the circuit breaker (DC power cables are
connected to screw terminals).
•
If liquid is spilled on the device, immediately turn power off and disconnect power
cables as appropriate. Discontinue use to avoid the risk of fire or an electric shock.
•
If a foreign object falls into the device when the cover is off, turn power off and unplug
the power cable from the outlet. Using the device with power on could cause a fire or an
electric shock. Do not attempt to remove the object while the power is on.
520-10-026-30X
A note is informational in nature. Unlike cautions and danger notices, notes are
not related to the physical injury or damage to the device.
If you ignore a caution and mistreat the GR4000 or GS4000, you could cause
physical damage to the router or surroundings, or interrupt service to your
networks users.
COULD CAUSE PERSONAL INJURY OR DEATH TO YOURSELF AND OTHERS.
GS4000 Installation Guide Revision 4.00
ix