Table of Contents
Advertisement
1.3.2 POW-MSACE
This is the AC200V power supply used for GS4000-320E (AC). Regarding the LED, see Table
1.3-2.
(1) Outer Appearance
See Table 1.3-2 for LED Indicators.
Handle
Figure 1.3-2
(2) LEDs
In the AC200V power supply for GS4000-320E (AC), the action status is indicated by the
combination of the two LEDs as shown in Table 1.3-3.
Table 1.3-2
Name
POWER
ALARM
（LED = Green）
（LED = Red）
Power ON
Power OFF
Power OFF
Power ON
Power OFF
Power OFF
Note: There is the possibility that both POWER LED and ALARM LED are powered off depending on the type of trouble.
(3) Accessories
No accessories provided.
520-10-026-30X
LEDs
Outer Appearance of POW-MSACE
WARNING: TO MEASURE THE VOLTAGE AT A AC-POWERED DEVICE, THE END
TERMINAL IS ATTACHED TO POW-MSACE. ONLY TRAINED ENGINEERS OR
MAINTENANCE SERVICE PERSONELL ARE ALLOWED TO MEASURE THE
VOLTAGE. TO AVOID A FIRE OR AN ELECTRIC SHOCK, DO NOT INSERT
SMALL PINS OR PAPER CLIPS INTO THE TERMINAL.
LED Indicators on the POW-MSACE Front Panel
Action Status
Output voltage is normal.
Output voltage is abnormal.
Power is OFF or the output voltage is abnormal.（Note）
GS4000 Installation Guide Revision 4.00
Power switch
Mounting
Screw
Power Connector
Potential Tap
(See the "Warning" below.)
1-35
Advertisement
Table of Contents
