Preparations For Starting Up Gs4000 - Hitachi GS4000 Series Installation Manual

GS4000 Installation Guide Revision 4.00
4.13

PREPARATIONS FOR STARTING UP GS4000

(1) Setting of Configuration Definition Information
In order to use GS4000, you must input configuration definitions.
Regarding the detail information about the creation of configuration definitions, refer to the
following manuals.
GS4000・GS3000 Software manual, Configuration Settings CLI -CLI Type 1 Hierarchical
1.
Input Format (520-10-018)
GS4000・GS3000 Software manual, Configuration Commands CLI -CLI Type 1
2.
Hierarchical Input Format, Vol. 1 (520-10-020)
GS4000・GS3000 Software manual, Configuration Commands CLI -CLI Type 1
3.
Hierarchical Input Format, Vol. 2 (520-10-021)
(2) System Test
You must test the system to check if the configuration definitions are set correctly before using
it actually.
(3) Operation
Regarding the detail information about the method of operation management, refer to the
following manuals.
GS4000・GS3000 Software manual, Operations-Device Management Overview (520-10-
1.
019)
GS4000・GS3000 Software manual, Operations Commands, Vol. 1 (520-10-022)
2.
GS4000・GS3000 Software manual, Operations Commands, Vol. 2 (520-10-023)
3.
GS4000・GS3000 Software manual, MIB Reference (520-10-025)
4.
(4) Troubleshooting
Regarding the troubleshooting, refer to the following manuals.
GS4000・GS3000 Software manual, Operations-Device Management Overview (520-10-
1.
019)
GS4000・GS3000 Software manual, Message Log Reference (520-10-024)
2.
4-54
520-10-026-30X