Table of Contents
Advertisement
1.2
FAN UNIT (FAN-A)
This is the fan unit used for all the GS4000 models, which is pre-installed in the body of a
device.
(1) Outer Appearance
LEDs
Figure 1.2-1
(2) LEDs
The LEDs shown in Figure 1.2-1 above is for the body of a device, and the action status it
indicates differs depending on the type of a device or the position where the fan unit is
installed.
As for the status indicated by the each LED, refer to the section "1.1 Chassis".
*
520-10-026-30X
Lever
Outer Appearance of FAN-A
NOTE: Do not install optional components from a GS4000 or GR4000 into devices
other than another GS4000 or GR4000. Doing this causes a fire or an electric
shock.
GS4000 Installation Guide Revision 4.00
1-33
Advertisement
Table of Contents
