Table of Contents
Advertisement
Step 3
Open the small levers (not the big ones) towards the direction indicated in the
figure below. (The network interface board will come out 15mm or so towards you.)
Lever
Figure 5.7-3
*
520-10-026-30X
Lever
Network Interface Board Unlocked
NOTE: When removing a NIF from the slot, do it holding its levers so that its connector
part is detached smoothly. When moving levers, do it slowly without giving much
pressure to them.
NOTE: The big levers, which are located under the small ones, are not used for the
purpose of unlocking a NIF, therefore do not try to open them forcibly.
GS4000 Installation Guide Revision 4.00
5-49
Advertisement
Table of Contents
