Data Register (D); Link Register (W); Link Special Register (Sw) - Mitsubishi Electric MELSEC iQ-R Series User Manual

Data register (D)

This device can store numerical values.

Link register (W)

This device is used as a CPU module side device when refreshing word data between the network module, such as the CC-
Link IE Controller Network module and the CPU module.
Refreshing network modules using link register
Data are transferred/received between the link register (W) within the CPU module and the link register (LW) of the network
module, such as the CC-Link IE Controller Network module. The refresh range is specified using parameters on the network
module. The part which is not used for refreshing can be used for other applications.

Link special register (SW)

Word data information on the communication status and error detection status of a network, such as CC-Link IE Controller
Network, are output into the link special register (J\SW) on the network. The link special register (SW) is a device for using
as a refreshing target of link special registers in the network. The part which is not used for refreshing can be used for other
applications.
(1)
SW0A0.3
(1) The network status is checked.
27 DEVICES
468
27.3 User Device
CPU module
Used in a program.
SW
SW00A0
SW00A7
CC-Link
IE Controller Network module
SW
SW00A0
Refresh
SW00A7
Stores the baton pass
status of each station.