Mitsubishi Electric MELSEC iQ-R Series User Manual page 662

No. Name
SM1216 Data logging setting No.1
Data logging error
SM1217 Data logging setting No.1
Data logging data saving in
progress
SM1218 Data logging setting No.1
Logging data storage file
switching in progress
SM1220 Data logging setting No.2
to
SM1228
SM1230 Data logging setting No.3
to
SM1238
SM1240 Data logging setting No.4
to
SM1248
SM1250 Data logging setting No.5
to
SM1258
SM1260 Data logging setting No.6
to
SM1268
SM1270 Data logging setting No.7
to
SM1278
SM1280 Data logging setting No.8
to
SM1288
SM1290 Data logging setting No.9
to
SM1298
SM1300 Data logging setting No.10
to
SM1308
SM1312 Data logging setting No.1 to
to 10
SM1321 Data logging suspend/resume
flag
APPX
660
Appendix 4 List of Special Relay Areas
Data stored Details
Off: No error • This relay switches to on when a data logging function
On: Error
• This relay switches to off when the setting is registered or
Off: Not in progress This relay turns on when data in the internal buffer is being
On: In progress saved in the SD memory card with the data logging.
Off: Not in progress This relay switches to on when storage file switching is in
On: In progress progress.
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
Same configuration as the Data configuration is the same as the setting No.1
setting No.1 (SM1210 to SM1218).
OffOn: Suspend • When this relay changes from off to on, the data logging
OnOff: Resume
• When this relay changes from on to off, the data logging
error is generated.
by the stop command from CPU Module Logging
Configuration Tool.
function is suspended. In an off state of the data logging
start SM, no processing is performed.
function resumes. In an ON state of the data logging start
SM, no processing is performed.
Set by (setting
timing)
S (Status change)
S (Status change)
S (Status change)
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
Same
configuration as
the setting No.1
U