Table of Contents
Advertisement
Centrifuge Module Interface Operating Instructions
The Hettich unit buckets are numbered 1 through 4. The buckets rotate to
the Hatch for loading and unloading cassettes.
Figure 5:
The system performs the following process cycle:
•
The system loads samples that require centrifugation into the
cassettes.
•
The robot uses the scale, Figure 8, Weigh Pan and Scale , to weigh the
cassettes.
•
The robot removes the cassettes from the scale and loads the cassettes
into the Hettich unit.
•
The Hettich unit centrifuges the samples.
•
At the end of the Centrifuge cycle, the robot unloads spun cassettes
and loads unspun cassettes.
•
The robot moves the sample tubes from the cassettes back onto the
track.
For more information, refer to the Hettich unit documentation.
092D0001-02 Rev. A
Hettich Bucket Positions (Top View)
Introduction
page 11
Advertisement
Table of Contents
