Table of Contents
Advertisement
Maintenance
4. Remove the track access door to access the interface gate.
Figure 7:
1.
2.
3.
5. Clean the interface gate tube holder:
a. Remove any debris and inspect for damage.
b. Dampen a soft cleaning cloth with 70% isopropyl alcohol and wipe
c. Wipe dry with a soft, clean, dry cleaning cloth.
d. Dampen a cleaning cloth with water and wipe the tube holder.
e. Wipe dry with a clean, dry cleaning cloth.
6. Replace the track access door.
7. Pull out the E-stop button.
8. To restore power to the interface gate, pull up the gate control button
on the associated divert gate.
page 54
Interface Gate Tube Holder
Interface gate tube holder
Sample tube
Interface gate
the tube holder.
You can use an alcohol prep pad instead of the damp cloth.
Centrifuge Module Interface Operating Instructions
092D0001-02 Rev. A
Advertisement
Table of Contents
