Table of Contents
Advertisement
Introduction
The Centrifuge module tracks the amount of backup power available.
When there is only 30% power remaining, a message displays on the
LineMaster event log indicating the low battery. Other event messages
provide status of the Centrifuge module when it is running on battery
power.
The following table lists UPS messages that appear in the event log:
Table 1:
Event Log Messages
On battery
On bypass mode
Battery power remaining
Low battery
For additional information, refer to the Uninterruptible Power Supply
manual included with the Centrifuge module.
Status Beacon
The Status Beacon illuminates when the E-stop button is pressed or when
the system initiates an E-stop condition. When the beacon is illuminated, it
provides a visual indication that the Centrifuge requires operator attention.
page 16
Event Log UPS Messages
Centrifuge Module Interface Operating Instructions
Descriptions
The Centrifuge module is running on UPS
battery power.
The Centrifuge module is running in
bypass mode.
The percentage of battery power
remaining.
The amount of remaining battery power
is below the threshold.
092D0001-02 Rev. A
Advertisement
Table of Contents
