System Operation
3. Press the power button on the UPS panel to turn the UPS on.
Figure 3:
1.
2.
3.
4.
5.
6.
4. On the front of the interface computer, open the vertical panel and
press the power button.
5. Wait approximately 2 minutes for the interface computer to power on.
6. At the drive unit, move the power switch to the up position (On).
page 36
Centrifuge Module Components
E-stop
Drive unit, behind the panel
Robot computer, behind the panel
UPS panel
Interface computer
Z-Up button
Centrifuge Module Interface Operating Instructions
092D0001-02 Rev. A