Environmental Requirements - Huawei FusionModule1000A40 Installation Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
●
●

1.3 Environmental Requirements

Do not expose the equipment to flammable or explosive gas or smoke. Do not
perform any operation on the equipment in such environments.
Do not store any flammable or explosive materials in the equipment area.
Do not place the equipment near heat sources or fire sources, such as smoke,
candles, heaters, or other heating devices. Overheat may damage the equipment
or cause a fire.
Issue 07 (2022-12-15)
protection regulations and wear ESD clothing and ESD gloves or a well-
grounded ESD wrist strap.
Figure 1-2 Wearing an ESD wrist strap
When holding a board or a module with exposed circuit boards, hold its edge
without touching any components. Do not touch the components with bare
hands.
Package boards or modules with ESD packaging materials before storing or
transporting them.
D ANGER
D ANGER
D ANGER
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
8