Mounting Cables On The Cable Tray - Huawei FusionModule1000A40 Installation Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Procedure
Step 1 Select an appropriate plastic-coated metal hose.
Deduct the cable length of both ends in pre-fab. modules from the actual cable run length to
determine the required length of the plastic-coated metal hose.
Step 2 Cut the plastic-coated metal hose to the required length calculated in
Step 3 Route cables through the plastic-coated metal hose.
All monitoring cables must be routed at the same time through the same plastic-
coated metal hose.
1.
2.
3.
4.
----End
A.1.5 Mounting Cables on the Cable Tray
Prerequisites
●
●
Some external cables for the FusionModule1000 are long and have a large diameter. Assign
sufficient people to mount cables especially armored cables on cable trays if no assistant tool is
available onsite.
Preparations
Tools: step ladder, protective gloves, and safety helmet
Issue 07 (2022-12-15)
NO TE
NO TE
● To facilitate installation, it is recommended that you lay out cables to the measured
cable route length plus about 1 m.
● Do not tread on the plastic-coated metal hose during cable layout and routing.
NO TICE
Put a thin copper cable through a plastic-coated metal hose, with sufficient
length reserved at both ends to facilitate subsequent operations.
Lay out the plastic-coated metal hose with the thin copper cable in a straight
line.
When installing cables, bind all cables of the same category between two
devices.
Tie a cable or a bundle of cables with the thin copper cable at one end of the
plastic-coated metal hose. Pull the thin copper cable at the other end when
another person is holding the plastic-coated metal hose to pull the cables
through the hose.
Do not mount cables on a cable tray outdoors under bad weather conditions
if no shelter is available.
The selected cables have been routed through a plastic-coated metal hose.
NO TE
Copyright © Huawei Digital Power Technologies Co., Ltd.
A Basic Installation Operations
Step 1.
111