Removing The Cabinet Sliding Base Fasteners - Huawei FusionModule1000A40 Installation Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
If the pre-fab. module may need to be transferred to another site, the fasteners
should be properly stored so that the smart cooling product can be secured in the
case of transfer.
----End

8.2 Removing the Cabinet Sliding Base Fasteners

Prerequisites
The pre-fab. module has been installed and secured.
Preparations
Tool: adjustable wrench
Materials: none
Documents: none
Skill requirement: common technician
Context
●
●
Procedure
Step 1 Remove the bolts securing the cabinet sliding base fasteners using an adjustable
wrench, and remove the fasteners.
Issue 07 (2022-12-15)
NO TICE
The cabinets inside a pre-fab. module can be slid forward or backward on
sliding bases.
To prevent cabinets from sliding during pre-fab. module transportation, two
fasteners are secured to the front and rear of the cabinet sliding base
respectively. After the pre-fab. module is installed and secured, the fasteners
need to be removed.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Removing Transport Protection Materials
71