Huawei FusionModule1000A40 Installation Manual page 84

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Figure 9-1 Installing mounting ears
Step 3 Push the battery pack onto the guide rails, and secure the battery pack to the
cabinet rack rails using mounting ears and screws.
Figure 9-2 Installing a battery pack
Step 4 Install other battery packs in the same way.
Step 5 Connect cables between battery packs based on the battery pack wiring diagram.
----End
Follow-up Procedure
Verify the battery pack cable connections. Ensure that the battery pack quantity
and cable connections comply with the design and the cables or copper bars are
reliably installed.
Issue 07 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Installing Devices Inside Pre-fab. Modules
76