D Cleaning Pre-Fab. Modules - Huawei FusionModule1000A40 Installation Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Prerequisites
The pre-fab. modules have been installed.
Preparations
Tools: long-handled soft brush, barrel, vacuum cleaner, cotton cloth
Materials: detergent and clean water
Documents: none
Skill requirement: common technician
Procedure
Step 1 Clean the interior of a pre-fab. module.
1.
2.
3.
Step 2 Clean the exterior of a pre-fab. module.
1.
2.
----End
Issue 07 (2022-12-15)
D
Cleaning Pre-fab. Modules
Clean metal scraps in all holes drilled inside the pre-fab. module.
Clear all smudges inside the pre-fab. module.
Clean visible rubbish and dust inside the pre-fab. module.
Clear dust, rain marks, or stains on the outer panels of pre-fab. modules using
a long-handled soft brush dipped with alkaline or neutral detergent.
Wash the pre-fab. module with clean water.
NO TE
It is recommended that you clean the pre-fab. modules once every quarter.
Copyright © Huawei Digital Power Technologies Co., Ltd.

D Cleaning Pre-fab. Modules

125