Huawei DBS3900 Installation Manual page 88

Hide thumbs Also See for DBS3900:

Table of Contents

DBS3900 (Ver.B)

Installation Guide

Figure 6-70 Installing a 110 V dual-live-wire input power cable for the APM30H on the EPS

Step 3 Route the cable by referring to

Step 4 Label the installed cables by referring to Attaching a Sign Plate Label.

Step 5 Run each cable that leaves the cabinet in the PVC corrugated pipe, and then tie the pipe to the

cable hole in the cabinet.

Step 6 Waterproof the connector.

Installing the Power Cable Between the APM30H and the TMC11H

The power cables between the APM30H and the TMC11H are the input power cable for the

TMC11H and power cable for the junction box in the TMC11H. The power cables are used to

feed power to the TMC11H and other equipment from the APM30H. The power cables between

the APM30H and the TMC11H are optional, which are delivered and used with the TMC11H.

Prerequisite

The tools, such as a Phillips screwdriver, a cable cutter, and a multi-purpose crimping tool, are

Issue 06 (2011-09-15)

6.5.1 Cabling

lists the power cables between the APM30H and the TMC11H.

Huawei Proprietary and Confidential

6 Outdoor Scenario with AC Power Supply (BBU Installed

Requirements, and then use cable ties to bind the

in an APM30H)