DBS3900 (Ver.B)
Installation Guide
Figure 14-15 Securing the IBBS200D on the base
(1) M12x30 bolt
----End
14.2.2 Installing a Cabinet on a Metal Pole
This section describes the procedure and precautions to be taken for installing a cabinet on a
metal pole. An APM30H or TMC11H can be installed on a metal pole.
Procedure
Step 1 Use four M12×60 bolts to secure a trapezoidal rack at a proper height of a metal pole, as shown
in
Figure
Issue 06 (2011-09-15)
(2) Spring washer
14-16.
NOTE
l The cabinet cannot be installed at a height of more than 10,000 mm.
l The diameter of a metal pole must range from 60 mm to 114 mm.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 Indoor Scenario with DC Power Supply (BBU Installed
Indoors and RRU Powered Outdoors)
(3) Flat washer
(4) Gasket with an oblong hole
512