Ip Http Secure-Certificate - Dell PowerEdge M420 Reference Manual

Example
The following example enables the switch to be configured from a browser.
console(config)#ip http server

ip http secure-certificate

Use the ip http secure-certificate command in Global Configuration mode to
configure the active certificate for HTTPS. To return to the default setting,
use the no form of this command.
Syntax
ip http secure-certificate
no ip http secure-certificate
Parameter Description
Parameter
number
Default Configuration
The default value of the certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS certificate is generated using the crypto certificate generate
command in Global Configuration mode.
Example
The following example configures the active certificate for HTTPS.
console(config)#ip http secure-certificate 1
1624
Web Server Commands
number
Description
Specifies the certificate number. (Range: 1–2)