Snmp-Server Contact; Snmp-Server Enable Traps - Dell PowerEdge M420 Reference Manual

snmp-server contact

Use the snmp-server contact command in Global Configuration mode to set
up a system contact (sysContact) string. To remove the system contact
information, use the no form of the command.
Syntax
snmp-server contact
no snmp-server contact
text — Character string, 0 to 160 characters, describing the system contact
•
information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays setting up the system contact point as
"Dell_Technical_Support".
console(config)# snmp-server contact
Dell_Technical_Support

snmp-server enable traps

Use the snmp-server enable traps command in Global Configuration mode to
enable sending SNMP traps globally or to enable sending individual SNMP
traps. Use the no form of this command to disable sending SNMP traps
individually or globally.
1486
SNMP Commands
text