Syntax
ip pim register-rate-limit
no ip pim register-rate-limit
Parameter Description
Parameter
register-rate-limit
Default Configuration
The default threshold is 0. This indicates that the register limit is infinite.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ip pim register-rate-limit 10
ip pim rp-address
Use the ip pim rp-address command in Global Configuration mode to define
the address of a PIM Rendezvous point (RP) for a specific multicast group
range. Use the no form of this command to remove a configured RP. This
command replaces the ip pimsm rp-address command.
Syntax
ip pim rp-address {
no ip pim rp-address {
1028
Multicast Commands
0-2000
Description
The PIM register message limit in kilobytes per second. Range
0-2000.
rp-address group-address group-mask
rp-address group-address group-mask}
[ override ]}