Switchport Access Vlan - Dell PowerEdge M420 Reference Manual

The IP Subnet to VLAN association does not exist.

switchport access vlan

Use the switchport access vlan command in Interface Configuration mode to
configure the VLAN ID when the interface is in access mode. To reconfigure
the default, use the no form of this command.
Syntax
vlan-id
switchport access vlan
no switchport access vlan
vlan-id — A valid VLAN ID of the VLAN to which the port is configured.
•
Default Configuration
vlan-id
The default value for the parameter is 1.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
The command automatically removes the port from the previous VLAN and
adds it to the new VLAN.
Example
The following example configures a VLAN ID of interface 1/0/8 to become an
access member of VLAN ID 23.
console(config)#interface gigabitethernet 1/0/8
console(config-if-1/0/8)#switchport access vlan 23
738
VLAN Commands