Syntax
dhcp l2relay remote-id
no dhcp l2relay remote-id
Parameter Description
Parameter
remoteId
Default Configuration
Setting the DHCP Option 82 Remote ID is disabled by default.
Command Mode
Global Configuration.
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay remote-id dslforum vlan
10,20-30
dhcp l2relay trust
Use the dhcp l2relay trust command to configure an interface to mandate
Option-82 on receiving DHCP packets.
Syntax
dhcp l2relay trust
no dhcp l2relay trust
Default Configuration
DHCP Option 82 is discarded by default.
314
DHCP Layer 2 Relay Commands
remoteId
vlan
remoteId
Description
The string to be used as the remote ID in the Option 82
(Range: 1 - 128 characters).
vlan-range
vlan-range
vlan