console(config)#interface te1/1/1
console(config-if-Te1/1/1)#switchport mode trunk
console(config-if-Te1/1/1)#switchport trunk allowed vlan
add 2-150
console(config-if-Te1/1/1)#spanning-tree mst 1 port-
priority 16
console(config-if-Te1/1/1)#interface te1/1/2
console(config-if-Te1/1/2)#switchport mode trunk
console(config-if-Te1/1/2)#switchport trunk allowed vlan
add 200-349
console(config-if-Te1/1/2)#spanning-tree mst 2 port-
priority 16
console(config-if-Te1/1/2)#exit
name (mst)
Use the name command in MST mode to define the configuration name. To
return to the default setting, use the no form of this command.
Syntax
string
name
string — Case sensitive MST configuration name. (Range: 1-32
•
characters)
Default Configuration
Bridge address.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
682
Spanning Tree Commands