Match Protocol - Dell PowerEdge M420 Reference Manual

User Guidelines
The ip dscp, ip precedence, and ip tos match conditions are alternative ways
to specify a match criterion for the same Service Type field in the IP header
but with a slightly different user notation.
This specification is the
match specification in that you have complete control of specifying which
bits of the IP Service Type field are checked.
Example
The following example displays adding a match condition based on the value
of the IP TOS field in a packet.
console(config-classmap)#match ip tos AA EF

match protocol

Use the match protocol command in Class-Map Configuration mode to add
to the specified class definition a match condition based on the value of the
IP Protocol field in a packet using a single keyword notation or a numeric
value notation.
Syntax
match protocol {
protocol-name — Specifies one of the supported protocol name keywords.
•
The supported values are
protocol-number — Specifies the standard value assigned by IANA.
•
(Range 0–255)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
624
QoS Commands
free form
protocol-name
|
icmp , igmp , ip , tcp , and udp .
version of the IP DSCP/Precedence/TOS
protocol-number
}