Banner Exec; Banner Login; Banner Motd - Dell PowerEdge M420 Reference Manual

Command

banner exec

banner login

banner motd

banner motd
acknowledge
clear checkpoint
statistics
cut-through mode
exec-banner
hostname
initiate failover
ip address
ip address none
ip address {dhcp/bootp} Enables DHCP/BOOTP on the OOB port.
login-banner
member
motd-banner
movemanagement
nsf
ping
reload
156
Command Groups
Description
Sets the message that is displayed after a
successful login.
Sets the message that is displayed just before
the login prompt.
Specifies message-of-the-day banner.
Acknowledges message-of-the-day banner.
Clears the statistics for the checkpointing
process.
Enables the cut-through mode on the switch.
Enables exec banner on the console, telnet or
SSH connection.
Specifies or modifies the switch host name.
Forces failover of management unit.
Sets a static OOB port IP address.
Disables DHCP/BOOTP on the OOB port.
Enables login banner on the console, telnet, or
SSH connection.
Configures the switch.
Enables motd on the console, telnet, or SSH
connection.
Moves the Management Switch functionality
from one switch to another.
Specifies non-stop forwarding.
Sends ICMP echo request packets to another
node on the network.
Reloads the operating system.
a
Mode
GC
GC
GC
GC
GC
GC
LC
GC
GC
IC (out-
of-band)
IC (out-
of-band)
IC (out-
of-band)
LC
SG
LC
SG
GC
UE
PE