Dhcp Snooping - Dell PowerEdge M420 Reference Manual

Command
renew dhcp
debug dhcp packet
show dhcp lease
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

DHCP Snooping

Command
clear ip dhcp snooping
binding
clear ip dhcp snooping
statistics
ip dhcp snooping
ip dhcp snooping binding
ip dhcp snooping database Configures the persistent location of the DHCP
ip dhcp snooping database
write-delay
ip dhcp snooping limit
ip dhcp snooping log-
invalid
ip dhcp snooping trust
ip dhcp snooping verify
mac-address
Description
Forces the DHCP client to immediately renew
an IPv4 address lane.
Displays debug information about DHCPv4
client activities and traces DHCP v4 packets to
and from the local DHCPv4 client.
Displays IPv4 addresses leased from a DHCP
server.
Description
Clears all DHCP Snooping entries.
Clears all DHCP Snooping statistics.
Enables DHCP snooping globally or on a
specific VLAN.
Configures a static DHCP Snooping binding.
snooping database.
Configures the interval in seconds at which the
DHCP Snooping database will be stored in
persistent storage.
Controls the maximum rate of DHCP
messages.
Enables logging of DHCP messages filtered by
the DHCP Snooping application.
Configure a port as trusted for DHCP snooping. IC
Enables the verification of the source MAC
address with the client MAC address in the
received DHCP message.
Command Groups
a
Mode
PE
PE
PE
a
Mode
PE
PE
GC or
IC
GC
GC
GC
IC
IC
GC
85