Show Arp Switch; Show Hosts - Dell PowerEdge M420 Reference Manual

show arp switch

Use the show arp switch command in Privileged EXEC mode to display the
ARP cache entries learned on the management port.
Syntax
show arp switch
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
NOTE: This command only shows ARP entries used by the management interface. It
is logically separate from the ARP table used by the routing interfaces. See the
show arp command for details on how to view ARP entries for the routing
interfaces.
Example
The following example displays ARP table information.
console#show arp switch
MAC Address
------------------- ---------------- ------------
0016.9CE1.D800

show hosts

Use the show hosts command in User EXEC mode to display the default
domain name, a list of name server hosts, and the static and cached list of
host names and addresses. The command itself shows hosts [hostname].
IP Address
10.27.6.1
IP Addressing Commands
Interface
1/0/37
473