Show Mac Address-Table Static - Dell PowerEdge M420 Reference Manual

---- -------------- ----
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1

show mac address-table static

Use the show mac address-table static command in User EXEC or Privileged
EXEC mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address
vlan-id
[vlan ]
Parameter Description
Parameter
mac-address
interface-id
vlan-id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
280
Address Table Commands
Description
A MAC address with the format xxxx.xxxx.xxxx.
Specify an interface type; valid interfaces include physical ports
and port channels.
Specify a valid VLAN; the range is 1 to 4093.
-------------
mac-address
] [interface
interface-id
]