Dell PowerEdge M420 Reference Manual page 126

Command
show ipv6 mld traffic
show ipv6 neighbors
show ipv6 route
show ipv6 route
preference
show ipv6 route summary Displays a summary of the routing table.
show ipv6 traffic
show ipv6 vlan
traceroute ipv6
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Loopback Interface
Command
interface loopback
show interface loopback
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Multicast
Command
ip mcast boundary
ip mroute
126
Command Groups
Description
Displays MLD statistical information for the
router.
Displays information about IPv6 neighbors.
Displays the IPv6 routing table.
Shows the preference value associated with
the type of route.
Shows traffic and statistics for IPv6 and
ICMPv6.
Displays IPv6 VLAN routing interface
addresses.
Discovers the routes that packets actually
take when traveling to their destination
through the network on a hop-by-hop basis.
Description
Enters the Interface Loopback configuration
mode.
Displays information about configured
loopback interfaces.
Description
Adds an administrative scope multicast
boundary.
Creates a static multicast route for a source
range.
a
Mode
PE
PE
PE
PE
PE
UE
PE
PE
a
Mode
GC
PE
a
Mode
IC
GC