Dell PowerEdge M420 Reference Manual page 631

Syntax
policyname
policy-map
policyname
no policy-map
Parameter Description
Parameter
policyname
in
out
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this
command is successfully executed.
The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new ingress DiffServ policy
named "DELL."
console(config)#policy-map DELL in
console(config-policy-classmap)#
[in|out]
Description
Specifies the DiffServ policy name as a unique case-sensitive
alphanumeric string of characters. (Range: 1–31 alphanumeric
characters.)
The policy is applied on ingress. Must be specified to create
new DiffServ policies. An existing policy can be selected
without specifying "in" or "out".
The policy is applied on egress. Either "in" or "out" must be
specified to create a new DiffServ policy. An existing policy may
be selected without the "in" or "out" parameter.
QoS Commands
631