Show Ipv6 Pimsm Rp Mapping - Dell PowerEdge M420 Reference Manual

3001::1 BSR

show ipv6 pimsm rp mapping

Use the show ipv6 pimsm rp mapping command to display all group-to-RP
mappings of which the router is aware (either configured or learned from the
bootstrap router (BSR). If no RP is specified, all active RPs are displayed
Syntax
rp-address
show ipv6 pimsm rp mapping [
]
rp-address — IP address of RP.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm rp mapping
Group Address..................................
FF1E::/64
RP Address.....................................
2001::1
origin.........................................
Static
Group Address..................................
FF1E::/64
1063
IPv6 Multicast Commands