User Session-Timeout - Dell PowerEdge M420 Reference Manual

enc-password —User password in encrypted form.
•
Default Configuration
There are no users configured by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(Config-CP)#user 1 password
Enter password (8 to 64 characters): ********
Re-enter password: ********

user session-timeout

Use the user session-timeout command to set the session timeout value for a
captive portal user. Use the "no" form of this command to reset the session
timeout to the default.
Syntax
user-id
user session-timeout
user-id
no user
user-id — User ID (Range: 1–128).
•
timeout —Session timeout. 0 indicates use global configuration (Range:
•
0–86400 seconds).
Default Configuration
The global session timeout is used by default.
Command Mode
Captive Portal Configuration mode.
1296
Captive Portal Commands
timeout
session-timeout