Show Captive-Portal User - Dell PowerEdge M420 Reference Manual

Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#no user 1

show captive-portal user

Use the show captive-portal user command to display all configured users or a
specific user in the captive portal local user database.
Syntax
show captive-portal user [ user-id ]
user-id — User ID (Range: 1–128).
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
Session
User ID User Name Timeout Group ID Group
Name
------- --------------------- ------- ------------ --------
----
1292
Captive Portal Commands