Show System; System Information - Dell PowerEdge M420 Reference Manual

Switch Status..................... OK
Switch Description................ PowerConnect 7048
Expected Code Type................ 0x100b000
Detected Code Version............. 5.31.1.46
Detected Code in Flash............ 5.31.1.46
CPLD Version...................... 5
SFS Last Attempt Status........... None
Serial Number..................... none
Up Time........................... 0 days 2 hrs 14 mins 54 secs
console#
Example – SDM Templates
This example shows the SDM Mismatch value in the Switch Status field.
console#show switch
Management Standby Preconfig
SW Switch Status
-- ---------- ------ ------------- ------------- -----------
1 Mgmt Sw
2
2.24.17.48

show system

Use the show system command in User EXEC mode command to display

system information.

Syntax
unit
show system [
unit — The unit number.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
Model ID
ANFirebolt-48
ANFirebolt-48
]
Plugged-in
Model ID
ANFirebolt-48
ANFirebolt-48
System Management Commands
Switch Code
Status Version
OK 2.24.17.48
SDM Mismatch
1577