Ip Telnet Port - Dell PowerEdge M420 Reference Manual

Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Default Value
This feature is enabled by default.
Example
console#configure
console(config)#ip telnet server disable
console(config)# no ip telnet server disable

ip telnet port

The ip telnet port command is used to configure the Telnet service port
number on the switch.
Syntax
port number
ip telnet port
port number — Telnet service port number (Range: 1–65535)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
1596
Telnet Server Commands