Show Ip Ospf Virtual-Link - Dell PowerEdge M420 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console(config)#show ip ospf stub table
AreaId
------------- -------------
0.0.0.1

show ip ospf virtual-link

Use the show ip ospf virtual-link command in Privileged EXEC mode to
display the OSPF Virtual Interface information for a specific area and
neighbor or for all.
Syntax
show ip ospf virtual-link [
area-id — Identifies the OSPF area whose ranges are being displayed.
•
(Range: IP address or decimal from 0–4294967295)
neighbor-id — Identifies the neighbor's router ID. (Range: Valid IP
•
address)
Default Configuration
Show information for all OSPF Virtual Interfaces.
1138
OSPF Commands
TypeofService
Normal
area-id neighbor-id
Metric Val Import SummaryLSA
---------- -----------------
1
]
Enable