Show Classofservice Trust - Dell PowerEdge M420 Reference Manual

58
59
60
61
62
63
console#

show classofservice trust

Use the show classofservice trust command in Privileged EXEC mode to
display the current trust mode setting for a specific interface.
Syntax
show classofservice trust [{gigabitethernet
channel-number | tengigabitethernet unit/slot/port }]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the port trust mode of the interface is displayed.
If omitted, the port trust mode for global configuration is shown.
Example
The following example displays the current trust mode settings for the
specified port.
console#show classofservice trust 1/0/2
Class of Service Trust Mode: Dot1P
640
QoS Commands
3
3
3
3
3
3
unit/slot/port port-
| port-channel