Show Link-Dependency - Dell PowerEdge M420 Reference Manual

Examples
console(config-linkDep-group-1)#depends-on
gigabitethernet 1/0/10
console(config-linkDep-group-1)#depends-on port-
channel 6

show link-dependency

Use the show link-dependency command to show the link dependencies
configured for a particular group. If no group is specified, then all the
configured link-dependency groups are displayed.
Syntax
show link-dependency [
GroupId — Link dependency group identifier. (Range: Valid Group Id,
•
1–16)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
No specific guidelines
Example
The following command shows link dependencies for all groups.
console#show link-dependency
GroupId Member Ports
------- --------------------- ----------------------------------
2 1/0/1-4
3 1/0/5
5 1/0/3-4
530
Link Dependency Commands
group GroupId
]
Ports Depended On
po3
1/0/8-9
1/0/10