Dell PowerEdge M420 Reference Manual page 106

Command
msgauth
name
primary
priority
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
radius-server source-ip
radius-server timeout
retransmit
show aaa servers
show radius-servers
show radius-servers
statistics
source-ip
106
Command Groups
Description
Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
Assigns a name to a RADIUS server.
Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
Specifies the order in which the servers are to be
used, with 0 being the highest priority.
Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
Specifies a RADIUS server host.
Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
Specifies the number of times the software
searches the list of RADIUS server hosts.
Specifies the source IP address used for
communication with RADIUS servers.
Sets the interval for which a switch waits for a
server host to reply.
Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
Displays the RADIUS server settings.
Shows the statistics for an authentication or
accounting server.
Specifies the source IP address to be used for
communication with RADIUS servers.
a
Mode
R
R
R
R
GC
GC
GC
GC
GC
GC
R
UE or
PE
PE
PE
R