Dell PowerEdge M420 Reference Manual page 108

Command
spanning-tree loopguard
spanning-tree max-age
spanning-tree max-hops
spanning-tree mode
spanning-tree mst
configuration
spanning-tree mst cost
spanning-tree mst port-
priority
spanning-tree mst priority
spanning-tree portfast
spanning-tree portfast
bpdufilter default
spanning-tree portfast
default
spanning-tree port-priority Configures port priority.
spanning-tree priority
spanning-tree tcnguard
spanning-tree transmit
hold-count
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
108
Command Groups
Description
Enables loop guard on all ports.
Configures the spanning tree bridge maximum
age.
Sets the MSTP Max Hops parameter to a new
value for the common and internal spanning
tree.
Configures the spanning tree protocol.
Enables configuring an MST region by entering
the multiple spanning-tree (MST) mode.
Configures the path cost for multiple spanning
tree (MST) calculations.
Configures port priority.
Configures the switch priority for the specified
spanning tree instance.
Enables PortFast mode.
Discards BPDUs received on spanningtree ports
in portfast mode.
Enables Portfast mode on all ports.
Configures the spanning tree priority.
Prevents a port from propagating topology
change notifications.
Set the maximum number of BPDUs that a
bridge is allowed to send within a hello time
window (2 seconds).
a
Mode
GC
GC
GC
GC
GC
IC
IC
GC
IC
GC
GC
IC
GC
IC
GC