Manual Aggregation of LAGs
PowerConnect switching supports the manual addition and deletion of links
to aggregates.
In the manual configuration of aggregates, the ports send their Actor
Information (LACPDUs) to the partner system in order to find a suitable
Partner to form an aggregation. When the Partner System neglects to respond
using LACPDUs, the PowerConnect switching aggregates manually. The
PowerConnect switching uses the currently configured default Partner Values
for Partner Information.
Commands in this Chapter
This chapter explains the following commands:
channel-group
interface port-channel
interface range port-channel
hashing-mode
lacp auto
lacp off
lacp port-priority
lacp static
channel-group
Use the channel-group command in Interface Configuration mode to
configure a port-to-port channel. To remove the channel-group configuration
from the interface, use the no form of this command.
Syntax
port-channel-number
channel-group
no channel-group
port-channel-number — Number of a valid port-channel for the current
•
port to join.
lacp system-priority
lacp timeout
no lacp
port-channel min-links
show interfaces port-channel
show lacp
show statistics port-channel
mode {on | auto}
Port Channel Commands
577