Dell PowerEdge M420 Reference Manual page 129

OSPF
Command
area default-cost
area nssa
area nssa default-info-
originate
area nssa no-redistribute Configures the NSSA Area Border router (ABR)
area nssa no-summary
area nssa translator-role
area nssa translator-stab-
intv
area range
area stub
area stub no-summary
area virtual-link
area virtual-link
authentication
area virtual-link dead-
interval
area virtual-link hello-
interval
Description
Configures the advertised default cost for the
stub area.
Configures the specified area ID to function as an
NSSA.
Configures the metric value and type for the
default route advertised into the NSSA.
so that learned external routes are not
redistributed to the NSSA.
Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
Configures the translator role of the NSSA.
Configures the translator stability interval of the
NSSA.
Creates a specified area range for a specified
NSSA.
Creates a stub area for the specified area ID.
Prevents Summary LSAs from being advertised
into the NSSA.
Creates the OSPF virtual interface for the
specified area-id and neighbor router.
Configures the authentication type and key for
the OSPF virtual interface identified by the area
ID and neighbor ID.
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
area-id and neighbor router.
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by the
area ID and neighbor ID.
Command Groups
a
Mode
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
129