Debug Cfm - Dell PowerEdge M420 Reference Manual

Out-of-order Loopback Replies received: 0
Bad MSDU Loopback Replies received
Loopback Replies transmitted
Unexpected LTR's received
------------------------------------------------------------------
Statistics for 'Domain: domain1, Level: 1, Vlan: 11, MEP Id: 2'
------------------------------------------------------------------
Out-of-sequence CCM's received
CCM's transmitted
In-order Loopback Replies received
Out-of-order Loopback Replies received: 5
Bad MSDU Loopback Replies received
Loopback Replies transmitted
Unexpected LTR's received
------------------------------------------------------------------
Statistics for 'Domain: domain1, Level: 1, Vlan: 11, MEP Id: 3'
------------------------------------------------------------------
Out-of-sequence CCM's received
CCM's transmitted
In-order Loopback Replies received
Out-of-order Loopback Replies received: 0
Bad MSDU Loopback Replies received
Loopback Replies transmitted
Unexpected LTR's received

debug cfm

Use the debug cfm command in Privileged EXEC mode to enable CFM
debugging. Use the no form of the command to disable debugging.
Syntax
debug cfm { event | {pdu { all | ccm | ltm | lbm | } {tx | rx} }}
: 0
: 5
: 0
: 0
: 1
: 5
: 0
: 0
: 0
: 0
: 1
: 0
: 0
: 5
: 0
Ethernet CFM Commands
423