Mac Address-Table Static - Dell PowerEdge M420 Reference Manual

Parameter
ip-multicast-address
interface-
interface
list
Default Configuration
No Multicast addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
If the command is executed without add or remove, the command registers
only the group in the bridge database.
Static Multicast addresses can be defined only on static VLANs.
Examples
The following example registers the MAC address.
console(config)#mac address-table vlan 8 multicast
static 0100.5e02.0203
The following example registers the MAC address and adds ports statically.
console(config)#interface vlan 8
console(config)# mac address-table vlan 8 multicast
static 0100.5e02.0203 add interface gigabitethernet
1/0/1-9, 1/0/2

mac address-table static

Use the mac address-table static command in Global Configuration mode to
add a static MAC-layer station source address to the bridge table. To delete
the MAC address, use the no form of the mac address-table static command.
268
Address Table Commands
Description
IP multicast address.
Specify a comma separated list of interfaces, a range of
interfaces, or a combination of both. Interfaces can be port-
channel numbers or physical ports in unit/slot/port format.