Ipv6 Multicast - Dell PowerEdge M420 Reference Manual

IPv6 Multicast

Command
ipv6 pimsm (Global
Config)
ipv6 pimsm (VLAN
Interface Config)
ipv6 pimsm bsr-border
ipv6 pimsm bsr-candidate
ipv6 pimsm dr-priority
ipv6 pimsm hello-interval
ipv6 pimsm join-prune-
interval
ipv6 pimsm register-
threshold
ipv6 pimsm rp-address
ipv6 pimsm rp-candidate
ipv6 pimsm spt-threshold
ipv6 pimsm ssm
show ipv6 pimsm
show ipv6 pimsm bsr
122
Command Groups
Description
Administratively enables PIMSM for IPv6
multicast routing.
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
Configures the router to announce its
candidacy as a bootstrap router (BSR).
Sets the priority value for which a router is
elected as the designated router (DR).
Administratively configures the PIM-SM Hello
Interval for the specified interface.
Administratively configures the interface
join/prune interval for the PIM-SM router,
Configures the Register Threshold rate for the
RP router to switch to the shortest path.
Statically configures the Rendezvous Point (RP)
address of a PIM for one or more multicast
groups.
Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP).
Configures the Data Threshold rate for the last-
hop router to switch to the shortest path on the
router.
Defines the Source Specific Multicast (SSM)
range of multicast addresses.
Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
Displays the bootstrap router (BSR)
information.
a
Mode
GC
IC
IC
GC
IC
IC
IC
GC
GC
GC
GC
GC
PE
PE