Show Ip Igmp Snooping Groups - Dell PowerEdge M420 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC
User Guidelines
This command has no user guidelines.

show ip igmp snooping groups

Use the show ip igmp snooping groups command in User EXEC mode to
display the Multicast groups learned by IGMP snooping.
Syntax
show ip igmp snooping groups [vlan
vlan_id — Specifies a VLAN ID value.
•
ip-multicast-address — Specifies an IP Multicast address.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
To see the full Multicast address table (including static addresses) use the
show bridge address-table command.
Example
The example shows Multicast groups learned by IGMP snooping for all
VLANs.
console>show ip igmp snooping groups
Vlan IP Address
vlan-id
] [address
Ports
IGMP Snooping Commands
ip-multicast-address
]
443