Show Ip Igmp Snooping - Dell PowerEdge M420 Reference Manual

Syntax
ip igmp snooping mrouter-time-out
no ip igmp snooping mrouter-time-out
time-out — mrouter timeout in seconds for IGMP. (Range: 1–3600)
•
Default Configuration
The default value is 300 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the mrouter timeout to 200 seconds.
console(config-if-1/0/1)#ip igmp snooping mrouter-
time-out 200

show ip igmp snooping

Use the show ip igmp snooping command in Privileged EXEC mode to
display the IGMP snooping configuration.
Syntax
show ip igmp snooping [vlan
Parameter Description
Parameter
vlan-id
442
IGMP Snooping Commands
vlan-id
Description
Specifies a VLAN ID value (available only in Privileged EXEC
mode).
time-out
]