Conform-Color - Dell PowerEdge M420 Reference Manual

Examples
The following example displays how you set the class of service trust mode of
an interface to trust dot1p (802.1p) packet markings when in Global
Configuration mode.
console(config)#classofservice trust dot1p
The following example displays how you set the class of service trust mode of
an interface to trust IP Precedence packet mark
console(config)#classofservice trust ip-precedence

conform-color

Use the conform-color command in Policy-Class-Map Configuration mode
to specify second-level matching for traffic flow, the only possible actions are
drop, setdscp-transmit, set-prec-transmit, or transmit. In this two-rate form
of the policy command, the conform action defaults to send, the exceed
action defaults to drop, and the violate action defaults to drop. These actions
can be set with this command.
Syntax
conform-color
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify the conform-color command.
console(config-policy-classmap)#conform-color
test_class (test_class is <class-map-name>
607
QoS Commands