Dell PowerEdge M420 Reference Manual page 284

Syntax
unit/slot/port
show ports security addresses {gigabitethernet | port-channel
port-channel-number | tengigabitethernet unit/slot/port }
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays dynamic addresses for port channel number
1/0/1.
console#show ports security addresses gigabitethernet
1/0/1
Dynamic addresses: 83
Maximum addresses: 100
Learned addresses
------- ---------
284
Address Table Commands